Warm brick color that stays rich
Brick Paver Sealing in Lakeside, FL
Call (904) 606-1548 to ask about a free estimate for sealing your Lakeside brick pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals brick pavers near Lakeside, and how fast do they reply?
A local contractor can seal brick pavers at your Lakeside home, and you hear back within 1 business day, frequently sooner. The estimate is free and carries no obligation. Say whether the bricks are real clay or brick style concrete, and mention when they were laid. To start the conversation, call (904) 606-1548.
Brick pavers fade, collect green growth and lose joint sand like any other paver, yet they ask for a bit more care in choosing the sealer. A test spot and the right product keep the warm color from turning cloudy. To book a visit, get a free estimate.
Does brick need a different sealer than other pavers?
What are the two kinds of sealer for brick?
It can. Unilock says brick and natural stone absorb sealer at different rates, and a sealer designed for concrete may not suit every stone. That is why the product choice and a small test area come first on a brick job. To talk through the options, call (904) 606-1548.
Why does the finish matter on a warm brick color?
Western Interlock describes two families. Penetrating sealers soak in and typically last longer, while film forming sealers sit on the surface and often enhance color. For brick, a warm tone is the reason many people want sealing, so the finish deserves a sample. Ask to see one before you get a free estimate.
How can I tell if my Lakeside bricks are clay or concrete?
Which kind of brick is on a Lakeside walk?
Some brick paving is real clay brick, and some is concrete pavers made to look like brick. A contractor can usually tell on sight, and the answer affects the product choice. To have yours looked over, call (904) 606-1548.
Does the age of the paving change the plan?
Wikipedia counts 12,633 housing units in Lakeside, and homes of different ages carry paving of different ages. Older paving is more likely to carry a failed coat. Failed sealer is stripped before a new coat, according to a First Coast washing company. Share the age of your home when you get a free estimate.
What problems show up on brick pavers around Doctors Lake?
Why does brick turn green near Doctors Lake?
Doctors Lake is a brackish estuary of about 13 square miles with many docks, and Lakeside sits on its west shore. A First Coast company cites humidity from lake moisture and oaks as a Clay County factor, and damp shade grows algae on brick fast. Green film makes a brick walk slick. To get a walk checked, call (904) 606-1548.
What is the white haze, and what about sunken brick?
White haze is the other common sight. That salt film, called efflorescence, can take two to three months or up to a year to clear on new pavers, per Unilock, and sealing over it locks it in. Sunken bricks are a third problem, and sealer does not lift them. Mention any of these when you get a free estimate.
How long should new brick pavers wait before sealing?
How long is the wait for efflorescence to clear?
Wait until the efflorescence is gone. Unilock says 60 to 90 days, and clearing can take two to three months or up to a year. Nicolock advises 6 to 12 months for new pavers. The sources disagree on the number, but they agree on the reason: sealing too soon can trap moisture and salts. For your install date, call (904) 606-1548.
What should a new brick install do first?
If the bricks are new, ask the contractor to look for the haze before a date is set. Unilock also notes a whitish film can appear when moisture is trapped or when a second coat goes on before the first has set. A patient schedule avoids both. To set one up, get a free estimate.
What does the brick paver sealing process look like?
The brick process adds one extra step, which is matching the product to the material. The stages are below. To see how they would apply at your home, call (904) 606-1548.
1. Identify the brick
The contractor looks at whether the paving is clay brick or concrete, checks the age and notes any old sealer.
2. Test a hidden spot
Nicolock suggests trying the sealer on about 4 square feet in a hidden area to see how the brick takes it.
3. Wash and re-sand
The surface is washed, then joint sand is swept in. Polymeric sand needs about 24 hours to dry, per Unilock, and residue must be swept off.
4. Check for dryness
Western Interlock describes a plastic sheet test, where no condensation under the sheet means the pavers are dry enough.
5. Seal and cure
The coat goes on in one session, with sprinklers off, and the area stays closed for up to 48 hours of dry weather.
What does brick paver sealing cost in Lakeside?
What does a brick quote start from?
No page found gave a price for brick pavers alone. The table below uses the one published piece that exists, the $1.75 to $3.25 per square foot a First Coast company lists to clean, re-sand and seal paver decks and drives. Brick may be priced differently, so a contractor's written number after a test spot is the one to rely on. To get it, get a free estimate.
What adds to a brick sealing price?
Costs rise with prep. A failed coat has to be stripped first, and a First Coast washing company says that and empty joints turn the work into a two day restoration. Sunken or loose bricks must be reset before sealing. To go over what moves the price on your walk or terrace, call (904) 606-1548.
| Brick area | Typical Lakeside example | Clean, sand and seal |
|---|---|---|
| 250 sq ft | Front walk and entry steps | $438 to $812 |
| 500 sq ft | Brick terrace beside the back door | $875 to $1,625 |
| 800 sq ft | Brick drive with a border | $1,400 to $2,600 |
| 1,200 sq ft | Terrace plus a long walk to a dock | $2,100 to $3,900 |
Math based on the $1.75 to $3.25 per square foot that a First Coast paver company published for paver decks and drives. No published page gave a brick only rate, so a real brick quote may differ.
How do sealed brick pavers look around Lakeside?
How often do brick pavers need sealing in Lakeside?
How many years between coats on brick?
Plan on every three to five years if the area gets light use, and sooner under tires or by the pool. Unilock and Nicolock both give three to five years for pavers in general. A First Coast washing company says two to three is typical here, with full sun and summer storms pulling it shorter. To set a schedule, call (904) 606-1548.
Does the use of the brick change the schedule?
Western Interlock rates low traffic decorative areas at four to five years, moderate traffic at three to four, and high traffic at two to three. A brick front walk is low traffic, and a brick drive is not. Mention how the area is used when you get a free estimate.
What do Lakeside homeowners ask about brick paver sealing?
Is it good to seal pavers in Florida?
It can be for brick pavers, as long as the product suits the material. Unilock says brick and natural stone absorb sealer at different rates, and a sealer made for concrete may not suit every stone. Ask what the contractor plans to use and why.
How to seal your brick pavers?
A contractor tests a small hidden spot, washes the surface, refills the joints with sand, lets everything dry, then sprays the coat and rolls off the excess in one session. Brick adds a product check, since it may drink the sealer differently.
How long do paver sealers last?
Unilock and Nicolock both put sealer at three to five years for pavers in general, and a First Coast washing company says two to three on the First Coast. Traffic, sun and water decide where a brick area lands in that range.
Why is paver sealing so expensive?
The price covers washing, sand, drying time and a careful coat, and brick can add a test step. No page found gave a brick only rate, so a contractor builds the number after seeing the surface rather than quoting a flat fee.
Is real clay brick different from brick style concrete pavers?
Yes, and a contractor should tell which you have. Clay brick and concrete pavers can look alike, yet Unilock says brick and natural stone absorb sealer at different rates. That is why a test spot comes before any full coat.
Should white haze on brick pavers be sealed over?
No. Unilock says sealing over efflorescence locks it in. It is a salt film that can take two to three months, or up to a year, to fade on new pavers. Wait until it is gone, then clean and dry the surface.
How long should I wait to seal newly laid brick pavers in Lakeside?
Sources differ. Unilock says 60 to 90 days, while Nicolock says 6 to 12 months. Both aim to let salts clear first. Bring the install date and ask what the contractor suggests for your product.
Does my Lakeside HOA care about the finish on brick pavers?
Possibly. Read your association's rules or ask the manager before changing the look. A wet look finish makes brick read deeper and glossier from the street, so a natural finish may be the easier choice when an HOA is involved.
Which Lakeside area towns are covered for brick paver work?
A local contractor serves Lakeside and the places around it, including both shores of Doctors Lake. Choose a town for local notes, or call (904) 606-1548 to check yours.
Where can I read about other paver services?
Brick is one surface among several at most homes. The guides below cover the others, and any of them can be added to the same visit. To ask about a bundle, call (904) 606-1548.
Want the brick to keep its warm color?
A call or a short form reaches a local contractor, and a reply comes within 1 business day, usually much sooner.
Free, no obligation