Click To Call(904) 606-1548Click To Get A Free Estimate
Paver driveway with a clean herringbone pattern leading to a two car garage under a mature oak

A driveway that looks new to the curb

Driveway Paver Sealing in Lakeside, FL

Call (904) 606-1548 for a free estimate on sealing your Lakeside paver driveway.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 606-1548

Is driveway paver sealing available at my Lakeside home?

Yes, a local contractor handles driveway paver sealing in Lakeside, and the first reply arrives within 1 business day, often much quicker. The estimate costs nothing and carries no strings. Say how many cars use the drive and whether the apron near the street has stains. To get a reply, call (904) 606-1548.

The driveway is the first thing a visitor sees, and it takes tires, oil drips, sprinkler water and sun every day. Sealing deepens the color, locks the joint sand and gives the surface a coat that is easier to wash. Mention any spot that never seems to come clean when you get a free estimate.

Call (904) 606-1548

What shape is a typical Lakeside paver driveway in?

Wikipedia counts 12,633 housing units in Lakeside and 11,882 households, and the area grew from about 30,943 people in 2010 to 31,275 in 2020. That points to homes of many ages, and the driveways show it. Newer drives have bright color and tight joints, while older ones may carry faded pavers or a coat that has failed. To have yours looked at, call (904) 606-1548.

A drive near the water or under oak branches collects leaves, pollen and damp air as well as tire marks. A First Coast washing company also lists oak tannin stains as a common problem on pavers here. Tell the contractor which part of the drive stays shaded when you get a free estimate.

Front view of a sealed paver driveway with a lake and a wooden dock beyond the lawn
Stains

What marks does a sealed driveway keep off the surface?

Four marks come up most on driveways, and each one has a different fix. Oil and rust are treated before any coat goes on, and sealing then helps keep new marks near the surface. To see which apply to your drive, call (904) 606-1548.

Oil and tire marks

Venice Pavers lists oil and tire marks among the things driveways pick up. Stain treatment comes before the coat, so the marks are not sealed in.

Orange rust streaks

Irrigation water can leave rust on the apron. A First Coast washing company uses a rust treatment instead of more pressure, and says a small area is tested first.

Green growth in shade

Shaded edges and the strip along the garage stay damp longer. Algae is treated and washed away ahead of sealing.

Sand loss in summer storms

One First Coast page says paver joints wash out in summer. Fresh sand goes in before the coat, which then helps the joints hold.

How soon does a driveway need a fresh coat of sealer?

The answer follows traffic, and Western Interlock gives numbers. High traffic driveways need a new coat every two to three years, moderate traffic drives every three to four, and low traffic areas every four to five. Heavy vehicles may need a yearly touch up where they enter and leave the drive. To place your drive on that scale, call (904) 606-1548.

A water test shows the same thing. Western Interlock says water that beads for five minutes or more means the sealer still works, and water that soaks in within one to two minutes means a coat is due within six months. A First Coast washing company points to two to three years for the area, and Unilock gives three to five. Tell the contractor how many cars park there when you get a free estimate.

Should my Lakeside driveway be wet look or natural?

Wet look deepens the color and adds shine, and a natural finish stays close to the unsealed paver. Venice Pavers offers both. A driveway sees tires turning on it, and gloss tends to show scuffs sooner, so a lower sheen can age more gently. For a sample of each, get a free estimate.

Western Interlock also separates penetrating sealers, which soak in and typically last longer, from film forming ones, which sit on the surface and often enhance color but may need more frequent reapplication. Ask which type is planned and why it suits a drive. To go over the choices, call (904) 606-1548.

How long should a driveway sit before cars go back on it?

Longer than a pool deck or a walkway. Unilock says to allow up to 48 hours of dry weather for the coat to cure and to avoid walking or driving on the surface during that time. Nicolock waits at least 24 hours before anyone walks on the area. To line the date up with your week, call (904) 606-1548.

Planning helps here, since a driveway is also where you park. Park on the street or at a neighbor's for the closure, and move cars before the visit. Unilock also wants clear skies for 24 to 48 hours beforehand, so a rain forecast can move the day. When you get a free estimate, ask how the contractor handles a change of date.

Process

How does the driveway sealing process work?

A driveway follows the same five stages as other pavers, with extra attention to stains and to the apron by the street. Each stage is listed below. To see how long it would take for your drive, call (904) 606-1548.

1. Inspect and test

The contractor checks for sunken pavers, oil, rust and old sealer, and tests a small spot. Nicolock suggests a hidden area of about 4 square feet.

2. Treat and wash

Oil and rust get their own treatment, then the surface is washed. More pressure is not the answer to rust, according to a First Coast washing company.

3. Re-sand the joints

Fresh sand goes into the joints and is packed down. Sealing over empty joints is how weeds come back, per the same company.

4. Spray and roll

A sprayer lays the coat in sections and a dry roller removes the excess. Nicolock sprays in sections of about 60 square feet.

5. Cure with the drive closed

The drive stays free of tires and foot traffic while the coat cures and the sprinklers stay off.

Pricing

What does driveway paver sealing cost in Lakeside?

One First Coast company publishes $1.75 to $3.25 per square foot to clean, re-sand and seal paver decks and drives. The table applies that range to common driveway sizes. Larger drives usually cost less per foot, and the contractor sets the real figure after a look. To get yours, get a free estimate.

Extras sit on top of the base price. Resetting sunken pavers, stripping failed sealer and treating heavy rust all add work, and Unilock puts sealer itself at about $80 to $150 per gallon. Ask the quote to list each item. For a number on your own drive, call (904) 606-1548.

DrivewayTypical Lakeside layoutClean, sand and seal
450 sq ftSingle car drive with a front walk$788 to $1,462
700 sq ftTwo car drive with a wider apron$1,225 to $2,275
1,000 sq ftThree car drive or a long run to a side garage$1,750 to $3,250
1,300 sq ftCircular drive with a parking pad$2,275 to $4,225

Math based on the $1.75 to $3.25 per square foot that a First Coast paver company published for paver decks and drives. Stripping, joint sand and repairs are usually priced apart.

Get a Free Estimate

When in the year should a Lakeside driveway be sealed?

A First Coast washing company calls October and November the drier stretch, and it notes summer storms wash out joints. Unilock wants clear skies before and after, and temperatures between 50 and 90 degrees. Western Interlock warns that a surface above 90 degrees can spoil the job. To pick a date, call (904) 606-1548.

Lakeside drives are mostly in the sun, so a cool dry morning in fall is a safer bet than a July afternoon. Unilock says to turn sprinklers off around sealed pavers, so plan the visit around your sprinkler days. Ask for a date when you get a free estimate.

Photos

How do sealed paver driveways look in Lakeside?

Freshly sealed paver driveway in a suburban neighborhood with kids on scooters on a Lakeside driveway
Sealed paver pool deck on a Lakeside driveway
Sealed paver patio with chairs facing the lake on a Lakeside driveway
Sealed paver walkway to a front door on a Lakeside driveway
Close view of freshly sealed pavers on a Lakeside driveway
Paver area with one cleaned half beside a dirty half on a Lakeside driveway
Contractor cleaning pavers on a Lakeside driveway
Contractor sealing or sanding pavers on a Lakeside driveway
Questions

What do Lakeside homeowners ask about driveway sealing?

Is it good to seal pavers in Florida?

On a driveway it often is. A coat keeps oil and tire marks near the surface and slows color loss in full sun. Western Interlock adds that sealed pavers need a fresh coat on a schedule that follows how much the drive is used.

Can I clean sand and seal my pavers?

Yes, and that is the normal order of work: wash, refill the joints with sand, then seal. A First Coast company says sealing over empty joints is how weeds come back, so the sand step is not optional.

How long do paver sealers last?

Western Interlock lists two to three years on high traffic driveways, three to four on moderate ones and four to five on low traffic areas. Heavy vehicles can wear the entry and exit spots faster, which may call for a yearly touch up.

What is the average cost to seal pavers?

One First Coast company publishes $1.75 to $3.25 per square foot to clean, re-sand and seal. A 600 square foot Lakeside driveway lands near $1,050 to $1,950. Stripping, repairs and heavy stain work cost more.

How much is sealant for pavers?

Unilock puts sealer at about $80 to $150 per gallon, with coverage near 80 to 120 square feet per gallon for solvent based products and 100 to 150 for water based ones. A contractor's price also covers washing, sand and labor.

How soon can I park on a newly sealed driveway in Lakeside?

Not the same day. Unilock says to avoid walking or driving on the surface while it cures, and Nicolock waits at least 24 hours before foot traffic. Cars wait longer, so ask the contractor for the exact time for the product used.

Why do the ends of my driveway have orange stains?

Iron in irrigation water can leave rust marks on paver aprons, and a First Coast washing company says a rust treatment is the fix, not more pressure. Venice Pavers notes rust can often be lightened a lot before sealing.

Does my Lakeside HOA need to approve a driveway sealer?

Check the association rules or ask the manager. A move from a natural look to a glossy wet look changes how the drive reads from the street, so it is the kind of change a board may want to see in advance.

Which neighborhoods near Lakeside are covered for driveway work?

A contractor covers Lakeside and the towns around it. Pick your town to see local notes, or call (904) 606-1548 to check a street that is not listed.

What other paver jobs go with a driveway?

A driveway often comes with a front walk, a pool deck or a patio that needs the same treatment. Each guide below covers one area. To bundle them into one visit, call (904) 606-1548.

Want the driveway to look right at the curb again?

Call or send the short form, and a local contractor gets back to you within 1 business day, usually much sooner.

Call (904) 606-1548

Free, no obligation